View All

  • icon arrowBack to all categories

View All

icon arrow Go back
  • Misc Gears
    Misc Gears
    Misc Gears
  • 5D/7D Quickplate
    • Standard tripod plate fixings, 1/4 UNC

    • Aluminium construction

    • Stainless steel fixings

    • 180mm long bars as standard (other sizes available)

    5D/7D Quickplate
  • 40mm/T2.3 Cooke Speed Panchro Rehoused
    40mm/T2.3 Cooke Speed Panchro Rehoused
    • Common focus and iris gear positions relative to mount flange.

    • Less than 13" minimum object distance.

    • 110mm common front ring diameter.

    • M105 front filter thread.

    • PL mount; back focus adjustable with standard shims.

    • Price: POA (Price On Application)


    40mm/T2.3 Cooke Speed Panchro Rehoused
  • Scorpion Swing Away
    Scorpion Swing Away

    The new Scorpion universal swing away system is compatible with TLS matteboxes and allows each mattebox to pull away from the lens 20mm and turn through 90 degrees of rotation. It enables lenses and filters to be changed without the need to remove the matte box from the lens or rail system.

    Manufactured at True Lens Services from high grade 6082 T6 aluminium alloy with stainless steel fixings, the system is robust enough to hold high-end TLS matte boxes. Its lightweight construction makes it user friendly when shooting hand held. Anodised and blacked to match all our TLS products.

    Price:  60x15mm £325.00 (excluding VAT)

    Price:  120x19mm £350.00 (excluding VAT)

    Scorpion Swing Away
  • VCT14 Adaptor Plates
    VCT14 Adaptor Plates
    • High grade aluminium construction

    • Four rubber pads prevent lateral camera movement

    • Extra support pins can be introduced for various cameras

    • Upgradable to accept 15mm x 60mm support bars

    VCT14 Adaptor Plates
  • Broadcast ENG Support
    • Stainless steel screws supplied to secure the plate to the camera

    • Blue/black anodised bar lock off knobs

    • Choice of bar lengths from 143mm to 215mm long

    • Bars extendable using internal M12 thread in the bard end

    Broadcast ENG Support
  • DV Support Bars
    DV Support Bars
    • 15mm diameter x 180mm long aluminum bars (Other lengths available on request)

    • 1/4 UNC captive camera screw with 0.5mm pin to match standard DV camera fixing points

    • 3/8 UNC and 1/4 UNC tripod fixing point on the base

    • Rear bar fixing available to add shoulder mount, monitor or battery clip capability

    • Height and side to side adjustment to accomadate a variety of models

    • complete with 4.0mm allen key to adjust settings

    • Stainless steel fittings

    • Interfaces directly with VCT14 (VCT U14) quick release plate

    DV Support Bars
  • Kinetal 150mm T4
    Kinetal 150mm T4
    • Common focus and iris gear positions relative to mount flange.

    • Typically 4'2" minimum object distance.

    • 110mm common front ring diameter.

    • M105 front filter thread.

    • PL mount; back focus adjustable with standard shims.

    • Price: £3,000


    Kinetal 150mm T4
  • 60mm x 15mm x 1/4UNC Bar Bridge
    60mm x 15mm x 1/4UNC Bar Bridge
    • 60mm centres x 15mm diameter bar bridge system to support lenses and accessories on standard camerabar support brackets.

    60mm x 15mm x 1/4UNC Bar Bridge
  • Cooke 20-100mm Support

    Lens support bracket to be used with Cooke 20-100mm lenses

    Support inner diameter: 100mm

    Support thread: 3/8 UNC

    Cooke 20-100mm Support
  • Available for Canon 5D/7D.

  • Bar support to set 15mm diameter x 60 centre bars at their correct height on the Canon 5D and 7D.

  • Allows the use of follow focus units and mattebox in conjunction with relative bracketry.

Cam driven focus system and chassis style lens housing allow matte boxes and other accessories to be attached to the front of the lens without affecting focus movements. The benefit of zero backlash and image shift give accurate dual focus scales that repeat on direction and change with the cam drive system,  giving a wide spread of markings through the scale.

Aluminium alloy, stainless steel, brass and robust construction guarantees along serviceable life.


Compatible with the following TLS matteboxes using relevant interface:

  • Raven

  • Petrel

  • Kite

  • Tern

May also be used on other manufacturers' matte boxes, using the correct brackets.

  • Allows cameras to be fitted onto a VCT14 camera adaptor plate.

  • A bar support bracket is also available to fit 15mm bars to the front of the adaptor plate.

Standard ENG style bar support system, complete with 15mm bars up to 215mm long.

Anodised and blackened to match camera and other TLS products.

Fits all major ENG style cameras with V-lock quick release system to the base.

Manufacturer specific bar supports available:

  • Universal 

  • Sony

  • Panasonic

  • JVC

Manufactured from 6082T6 aluminium alloy and anodised and blackened to match other TLS accessories. Features quick release locking levers for the bar clamps.

Compatible with the following models:

  • Sony

  • Canon

  • Panasonic

  • JVC 

Cam driven focus system and chassis style lens housing allow matte boxes and other accessories to be attached to the front of the lens, without affecting focus movements. The benefit of zero backlash and image shift give accurate dual focus scales that repeat on direction and change with the cam drive system, giving a wide spread of markings through the scale.

Aluminium alloy, stainless steel, brass and robust construction guarantees along serviceable life

Manufactured from 6082T6 aluminium alloy with stainless steel fixings, these bar bridges can be used on a wide variety of applications.

Surface is anodised with a blackened finish and electric blue locking lever to match other TLS accessories.

Height has adjustable jacking point to suit accessories with 1/4 UNC fixing.

Also available with 3/8UNC jacking thread.